Pretty easy actually. You can remove the calipers completely with a 14mm spanner on two bolts. Makes pushing in the piston easier as you can just put it on a chock/seat/jack while doing it. Just keep an eye on your brake fluid as you push it in.
Alternatively you can do it by removing the slider pins IIRC. I don't do it that way but Andrew did last time we were at the track.
Where to buy brake pads from?
Moderators: timk, Stu, -alex, miata, zombie, Andrew
-
Hellmun
- Racing Driver
- Posts: 979
- Joined: Sat Feb 10, 2007 1:15 pm
- Vehicle: NB8B - Turbo
- Location: Wollongong,NSW
-
TieNN89
- Speed Racer
- Posts: 2012
- Joined: Mon Nov 26, 2007 8:27 pm
- Vehicle: NC
- Location: Brisbane
- Contact:
-
marcusus
- Speed Racer
- Posts: 2919
- Joined: Thu Jul 13, 2006 12:07 am
- Vehicle: NB8A
Where to buy brake pads from?
AZNTieN wrote:http://mx5cartalk.com/phpBB-3.0.2/viewtopic.php?f=30&t=34352
I did mine like a week before Regie did, so no need for his guide any more. Good write up though.
Return to “MX5 Wheels, Suspension, Brakes & Tyres”
Who is online
Users browsing this forum: No registered users and 10 guests
