Sydney Dodgy Day - 14 October HUUUUUUUGE :)

[StanTheMan]

Comeooooooon BigDog......more dodgy videos!!!!!

[bigdog]

Ok - Liam's turn

Liam's Clip

[bigdog]

And the final clip - a bit of general Dodgy Goodness

Dodgy Stuff

[Ajay]

\"how many guys does it take to tell bevan what to do\" love it haha

[99MXV]

Noice work on the Vids BigDog.

What was that MEAT on the fire thing ?? I didnt see a deep fryer at all.

REAL Sauce... comes in glass. It melts plastic.

I see that the Dodgy protocol of one bloke working while everyone else stands and points is pretty much par for the course everywhere.

[Caffeine]

Ok - Liam's turn

Liam's Clip

Thanks BigDog, I wish it really was that quick to change bushes!!

[Garry]

What a fun day. I intended just watching but ended up with dirty hands. Once I see a motor in bits I cant seem to help myself. I learnt all about front hubs and VVT actuators yesterday. For people thinking of replacing the cam seals on the VVT motors remove the small cover on the actuator, not the big one, otherwise the guts could fall out of the actuator.

What major dramas STM, it was just a minor inconvenience. Nothing a longer bolt and a run through with a tap didn't fix.

A big thanks to Caffeine for supplying Dodgey Headquaters for the day and to Bigdog for manning the BBQ. Great to catch up wth the regulars and welcome to PhatMX

[idb000]

Unfortunately I wasn't able to get along yesterday, but it sounds like I missed a good day. I'll try for the next Dodgy Day!

[Bevan]

If you want to download the video to your computer, click the following links...
Beverley's Timing Belt change:
http://vid23.photobucket.com/albums/b39 ... sBelts.flv

Caff's Suspension:
http://vid23.photobucket.com/albums/b39 ... ension.flv

General Dodgyness:
http://vid23.photobucket.com/albums/b39 ... yOct07.flv

[ampz]

^^^

Are you going to use it for \"Proof of Service\" in the log book?

Wouldn't it help devalue your car if people knew you did the work on it?

(Ducks for cover)

[Bevan]

Thanks Liam for providing the working area. Those halogen lights were great.

The car is running beautifully and feels really nice and tight. Steering is nice and crisp now and there is no more rattling on cold start-up.

A FEW things to note:
- Take the power steering pump off. It's much easier if you just admit to yourself early that it needs to come off to get to those 2 waterpump bolts.
- Undo the brackets on the radiator so you can lift it off. Again, admit to yourself that this needs to be done to get the power steering pump off.
- Buy gasket goop before starting, if not, wait til you have everything off including the water pump before realising that the gaskets are metal. Go to the hardware store and buy some now.
- Do not cross-thread the waterpump to outlet thread. If you do, try and realise it as soon as possible.
- If you realise the above early enough, do not keep going. You will strip the inside of the waterpump to outlet thread. If you do, go to the hardware store, buy longer bolts and a 8x1.25 tap.
- Do not undo the bolts of the VVT mechanisim on front of the intake camshaft. Oil will piss out and you will be paranoid that the VVT internals will fall out. Undo the little plate in the middle instead. You need a star key though.
- Don't stress out that you still have 1 O-ring and a seal left over. With everything else going wrong to sidetract you, it's not surprising that you forgot about them.
- Don't promise anyone that you'll be at there place for dinner at 6pm... you will be 1 hour, 45 minutes late.

Thank you everyone for your help. It was a great team effort. Even with all the hassles, saving over $600 for a hard day's work is worth it. I spent $380 on parts, plus the extra crap from the hardware store on the day.

[jules]

Noice work on the Vids BigDog.

What was that MEAT on the fire thing ?? I didnt see a deep fryer at all.

REAL Sauce... comes in glass. It melts plastic.

I see that the Dodgy protocol of one bloke working while everyone else stands and points is pretty much par for the course everywhere.

Hmmm rather plain fare really. A noticeable lack of sunlight too in that cave

Jules

[Dave]

Noice work on the Vids BigDog.

What was that MEAT on the fire thing ?? I didnt see a deep fryer at all.

REAL Sauce... comes in glass. It melts plastic.

I see that the Dodgy protocol of one bloke working while everyone else stands and points is pretty much par for the course everywhere.

Hmmm rather plain fare really. A noticeable lack of sunlight too in that cave

Jules

It might have looked plain, however it was cooked superbly and the service was to die for.
Thanks Liam and Mel for putting on a great spread, and glad that all the work ended up going well.
I have a few photos I will post when I get a chance tonight.
Rgds,
Dave

[Bevan]

Blah Blah - half rant - blah blah. Bottom page 11.

And this is her all stripped down. Poor thing. Looks better with all her clothes on I can tell you.

[Bevan]

by the way bevan doesnt that BD bar look nice and shiny

It does mate! I was filling up this afternoon and thought, f&%k that's shiny. Then I remembered that your were polishing it! Feel free to polish my bar anytime...