Brake Pads ?

Kvision · Postby **Kvision** » Wed Jun 14, 2006 12:03 am

Hi guys,
need new brake pads for my 1993 1.6

Im after something streetable that I can depend on when I go for a spirited drive in the twisties, and also last a few laps on the track. I dont plan to go on track all that often, maybe once or twice a year, so the vast majority of driving is done on the street/twisties.

I think i need something along the lines of these

high performance
can stop well cold or hot
doesnt not chew up the rotors
reasonable pad wear
not too much dust
not too much noise
not too much $$

I've read the many threads here and on the old forums and I think I've narrowed it down to either the Hawk HPS or Bendix Advance (the advances seem to be the cheaper option at a little under $120 for all 4 corners). Which one would be more suitable to my needs?

mightyrollaman · Postby **mightyrollaman** » Wed Jun 14, 2006 12:15 am

Sounds like you'd be best sticking to stock. I'd hate to be cleaning any more dust off your wheels.

What's the latest pal? Still keen for a photoshoot? I am.

Richee · Postby **Richee** » Wed Jun 14, 2006 8:10 am

Kvision wrote: ..Bendix Advance (the advances seem to be the cheaper option at a little under $120 for all 4 corners).

I have put these on the Front along with new rotors and I dont think there is any more dust than previously. I havent put them under real pressure yet and they work well.

Richard

RobbieRat · Postby **RobbieRat** » Wed Jun 14, 2006 6:50 pm

(the advances seem to be the cheaper option at a little under $120 for all 4 corners).

That would be for each end not corner :lol:

With pads you pretty much get what you pay for and having said that, the stock pads are pretty good and won't fade on the track.

Kvision · Postby **Kvision** » Wed Jun 14, 2006 10:25 pm

mightyrollaman wrote:Sounds like you'd be best sticking to stock. I'd hate to be cleaning any more dust off your wheels.

What's the latest pal? Still keen for a photoshoot? I am.

Hey, I'm still up for a photoshoot after I finish my exams next thursday. Maybe organise a little cruise too...

RobbieRat wrote:
(the advances seem to be the cheaper option at a little under $120 for all 4 corners).

That would be for each end not corner

With pads you pretty much get what you pay for and having said that, the stock pads are pretty good and won't fade on the track.

well, from discpads they are $60 for the front, $40 for the rear and another $15 for shipping. So do you think that the advances would be ok at the track then?

Postby **Okibi** » Thu Jun 15, 2006 1:03 am

I wasn't happy with the Advance.

Kvision · Postby **Kvision** » Thu Jun 15, 2006 1:13 am

reasons?

Postby **Okibi** » Thu Jun 15, 2006 1:27 am

Didn't work as well as I had hoped (after using Ultimates)

Kvision · Postby **Kvision** » Thu Jun 15, 2006 1:57 am

but they're not a bad pad are they? would they be ok for what I'm after? or would u reccomend the ultimates as a better alternative?

Postby **Okibi** » Thu Jun 15, 2006 2:46 am

Ultimates leave a lot of dust, thats why I tried the Advance.

There has to be better than both these pads.

That said i'm not too happy with my brakes at the moment, probably need new rotors and a good fluid flash.

Matty · Postby **Matty** » Thu Jun 15, 2006 10:47 am

Learn to love the dust.

Then get some Cobalt GT-Sports.

CT · Postby CT » Thu Jun 15, 2006 1:20 pm

When you pay $60 for a set of pads, you can't expect they are decent for anything but driving to the shops - sometimes not even that. Good pads cost good money - as with everything. Hawk HPS is the first step to better pads, then if you want a more dual purpose track/road pad, check out Hawk HP Plus. They have also introduced a ceramic which my tech contact at Hawk reckons is a good thing with excellent cold performance so is well suited for MX5s.

There's my sponsors plug done. I really like Ferodo DS2500s for dual purpose and Matty likes the Cobalts - these are all very good pads. Once you have experienced a decent pad, you will not go back to cheap crap.

http://www.hawkperformance.com/performa ... eramic.pdf

http://www.hawkperformance.com/parts/se ... rts+%3E%3E

Postby **Okibi** » Thu Jun 15, 2006 2:11 pm

Here's the Cobalt GTs

http://www.cobaltfriction.com/productcart/pc/viewPrd.asp?idProduct=29359

http://www.cobaltfriction.com/productcart/pc/viewPrd.asp?idProduct=31937

Who sells them in Australia?

Kvision · Postby **Kvision** » Sat Jun 17, 2006 12:54 am

On a tight budget at the moment. I was prepared to fork out a little extra for the Hawk HPS but it seems no one in Australia has them in stock at the moment. Guess I'll be settling for the advances...better and cheaper than stock

irwin83r · Postby **irwin83r** » Sat Jun 24, 2006 1:36 pm

i hear that bendix use a laminate or something in their pads which is said to be bad for slotted or drilled rotors?? anyone know any more on this or should i ring my brake guy and get him to explain it more slowly to me this time

anyone tried QFM? (queensland firction mats) apparently they are looking to be a good australian brand up and coming with a track back ground.