There is a new forumite (several months ago) who's mate bought a set for his Silvia or Skyline and IIRC he stated that one (or both) snapped after a few corners on their local track.
It may be fine day to day normal driving, but please be careful when you start to push the envelope.
Has anybody tried these camber arms
Moderators: timk, Stu, -alex, miata, zombie, Andrew
-
Steampunk
- Speed Racer
- Posts: 4670
- Joined: Wed Oct 10, 2007 9:16 am
- Vehicle: NA6
- Location: Southside of Breeze-bane
-
Si.G
- Fast Driver
- Posts: 416
- Joined: Sat Mar 07, 2009 12:38 pm
- Vehicle: NA6
- Location: Perth, WA
Has anybody tried these camber arms
I have read about these arms hitting the subframe or chassis when you have a low ride height, basically results in them bending and snapping eventually - CHECK IT OUT http://forum.miata.net/vb/showthread.php?t=342639
there are some thoughts here too - http://mx5cartalk.com/forum/viewtopic.php?f=30&t=35984&start=0&hilit=camber+arms
I was looking at them, but decided to not bother.
Si.
there are some thoughts here too - http://mx5cartalk.com/forum/viewtopic.php?f=30&t=35984&start=0&hilit=camber+arms
I was looking at them, but decided to not bother.
Si.
NA6 B6T
Barbagallo Raceway : Long Track 67.394, Short Track 56.755
Barbagallo Raceway : Long Track 67.394, Short Track 56.755
Return to “MX5 Wheels, Suspension, Brakes & Tyres”
Who is online
Users browsing this forum: No registered users and 9 guests
