Zabinskii's High Comp VVT Na6
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
-
- Fast Driver
- Posts: 290
- Joined: Wed Dec 11, 2013 11:24 pm
- Vehicle: NA6
- Location: Gold Coast
Re: Zabinskii's High Comp VVT Na6
one very late update,
car is running and tuned
on both e85 and 98
e85 gets me 190whp
98 gets me 168whp
so, heres whats been done in the past,
coolant reroute was welded up, later modified to have a fill point as its the highest spot in the cooling system.
also came across some racing beat headers, picked them up for 200$ in almost new condition, so cant be bothered with the DIY headers anymore, or atleast for now.
bought a jdm cluster from a forum member Big thanks,
makes cluster faces alot less limited when i will decide to buy some later on.
picked up some 550cc ev14s, just so i can run e85 and not worry about any fueling issues and the spray pattern on these is much better,
Flex sesnor was wired up behind the seats on the return line
interior shot!
also had a very annoying failure. the valve stem seals which were replaced when the head was stripped and whatnot, decided to give way after 4000 odd km, supertech valve stem seals are not on my reccomended list of parts, so head had to come off and had to install precision engineering valve stem seals and buy another head gasket.
car is running and tuned
on both e85 and 98
e85 gets me 190whp
98 gets me 168whp
so, heres whats been done in the past,
coolant reroute was welded up, later modified to have a fill point as its the highest spot in the cooling system.
also came across some racing beat headers, picked them up for 200$ in almost new condition, so cant be bothered with the DIY headers anymore, or atleast for now.
bought a jdm cluster from a forum member Big thanks,
makes cluster faces alot less limited when i will decide to buy some later on.
picked up some 550cc ev14s, just so i can run e85 and not worry about any fueling issues and the spray pattern on these is much better,
Flex sesnor was wired up behind the seats on the return line
interior shot!
also had a very annoying failure. the valve stem seals which were replaced when the head was stripped and whatnot, decided to give way after 4000 odd km, supertech valve stem seals are not on my reccomended list of parts, so head had to come off and had to install precision engineering valve stem seals and buy another head gasket.
- smy0003
- Racing Driver
- Posts: 1870
- Joined: Mon Dec 30, 2013 12:35 pm
- Vehicle: NA8
- Location: Melbourne
Re: Zabinskii's High Comp VVT Na6
Wait, you're on your P's?
And you managed to do all this?
What?
Sent from my LG-H815 using Tapatalk
And you managed to do all this?
What?
Sent from my LG-H815 using Tapatalk
[b]Then: Sunlight Silver NB8B
Now: Chaste White NA8
Now: Chaste White NA8
-
- Fast Driver
- Posts: 290
- Joined: Wed Dec 11, 2013 11:24 pm
- Vehicle: NA6
- Location: Gold Coast
Re: Zabinskii's High Comp VVT Na6
bought same personalized plates aswell,
i was rocking the whole single centre exit for a month or so, and then i did it, i did the thing, the greatest choice to date.
also have a small clip of driving it
https://www.youtube.com/watch?v=JGkrlzgPVSY
https://www.youtube.com/watch?v=mhqazGs_Ly4
and dyno day, dont really have much else to update on at the current time. will be doing a few more things soon enough, door cards etc
i was rocking the whole single centre exit for a month or so, and then i did it, i did the thing, the greatest choice to date.
also have a small clip of driving it
https://www.youtube.com/watch?v=JGkrlzgPVSY
https://www.youtube.com/watch?v=mhqazGs_Ly4
and dyno day, dont really have much else to update on at the current time. will be doing a few more things soon enough, door cards etc
-
- Fast Driver
- Posts: 290
- Joined: Wed Dec 11, 2013 11:24 pm
- Vehicle: NA6
- Location: Gold Coast
Re: Zabinskii's High Comp VVT Na6
smy0003 wrote:Wait, you're on your P's?
And you managed to do all this?
What?
yeah, took me just over 5 months from start to finish (after i stripped the car)
been building up parts for about a year prior though
- smy0003
- Racing Driver
- Posts: 1870
- Joined: Mon Dec 30, 2013 12:35 pm
- Vehicle: NA8
- Location: Melbourne
Re: Zabinskii's High Comp VVT Na6
Unbelievably impressive. Give us some video of that ITB sound!
[b]Then: Sunlight Silver NB8B
Now: Chaste White NA8
Now: Chaste White NA8
-
- Speed Racer
- Posts: 7468
- Joined: Fri Feb 11, 2011 12:49 pm
- Vehicle: NA6
- Location: Purga, QLD
Re: Zabinskii's High Comp VVT Na6
Nice to meet you at Plus on Saturday. There were at least 4 ITB equiped cars there from memory.
- bruce
- Speed Racer
- Posts: 7703
- Joined: Fri Apr 25, 2003 11:00 am
- Vehicle: NA8 - Turbo
- Location: Victoria
- Contact:
-
- Fast Driver
- Posts: 290
- Joined: Wed Dec 11, 2013 11:24 pm
- Vehicle: NA6
- Location: Gold Coast
Re: Zabinskii's High Comp VVT Na6
smy0003 wrote:Unbelievably impressive. Give us some video of that ITB sound!
there are two links in the last post i did
https://www.youtube.com/watch?v=JGkrlzgPVSY
https://www.youtube.com/watch?v=mhqazGs_Ly4
- beavis
- Forum sponsor
- Posts: 1405
- Joined: Mon Feb 02, 2009 12:31 pm
- Vehicle: NB8B - Turbo
- Location: Melbourne
Re: Zabinskii's High Comp VVT Na6
Love it. 190hp is a nice number.
Is it me, or does it look like the coolant re-route pipe is welded to the valve cover at the bolt holes.
Is it me, or does it look like the coolant re-route pipe is welded to the valve cover at the bolt holes.
Turbo NB Build Thread | BeavisMotorsport.com | YouTube.com/bbeavis | Cars: NA6, NA8-VVT, NB-Turbo, ND-2L
-
- Racing Driver
- Posts: 1117
- Joined: Tue Dec 31, 2013 12:11 pm
- Vehicle: NA6
Re: Zabinskii's High Comp VVT Na6
Zabinskii wrote:e85 gets me 190whp
98 gets me 168whp
wow that's a big jump in power from the e85 for a N/A engine. I saw a 7% increase from 98 to e85. Was the 98 fully tuned?
nice build by the way.... looks great!
NA8: N/A 200whp | Haltech | Skunk2 Intake | S90 TB | RCP | 5 speed c/r dogbox | 4.78 diff | AST Shocks
Barbs L: 64.12 | S: 58.62 | Collie: 49.72
Barbs L: 64.12 | S: 58.62 | Collie: 49.72
-
- Speed Racer
- Posts: 7468
- Joined: Fri Feb 11, 2011 12:49 pm
- Vehicle: NA6
- Location: Purga, QLD
Re: Zabinskii's High Comp VVT Na6
Madjak it looks very nice in the flesh! There a few NA cars making noise at the Plus day...
-
- Driver
- Posts: 89
- Joined: Mon Sep 16, 2013 12:37 pm
- Vehicle: NA8
- Location: Gold Coast
Re: Zabinskii's High Comp VVT Na6
Zabinskii wrote:smy0003 wrote:Wait, you're on your P's?
And you managed to do all this?
What?
yeah, took me just over 5 months from start to finish (after i stripped the car)
been building up parts for about a year prior though
Yeah... thats what i thought too, if a bloody teenager can do a build like this, anyone can.
Yellow NA8 that makes lots of noise
-
- Fast Driver
- Posts: 290
- Joined: Wed Dec 11, 2013 11:24 pm
- Vehicle: NA6
- Location: Gold Coast
Re: Zabinskii's High Comp VVT Na6
madjak wrote:Zabinskii wrote:e85 gets me 190whp
98 gets me 168whp
wow that's a big jump in power from the e85 for a N/A engine. I saw a 7% increase from 98 to e85. Was the 98 fully tuned?
nice build by the way.... looks great!
yeah it was fully tuned, for some reason the whole setup didnt like any timing, thinking compression is a tad too high, its sitting at about 12:1 IIRC
but e85 we could add alot more timing to and it didnt mind it at all,
still ave to take it back to the tuner as there are a few small spots he can iron out for me to make it a lil more street friendly.
-
- Fast Driver
- Posts: 290
- Joined: Wed Dec 11, 2013 11:24 pm
- Vehicle: NA6
- Location: Gold Coast
Re: Zabinskii's High Comp VVT Na6
beavis wrote:Love it. 190hp is a nice number.
Is it me, or does it look like the coolant re-route pipe is welded to the valve cover at the bolt holes.
thats just you beavis, its all you. <3 <3
luv the exhaust btw
- beavis
- Forum sponsor
- Posts: 1405
- Joined: Mon Feb 02, 2009 12:31 pm
- Vehicle: NB8B - Turbo
- Location: Melbourne
Re: Zabinskii's High Comp VVT Na6
Zabinskii wrote:beavis wrote:Love it. 190hp is a nice number.
Is it me, or does it look like the coolant re-route pipe is welded to the valve cover at the bolt holes.
thats just you beavis, its all you. <3 <3
luv the exhaust btw
OH IM SORRY. I zoomed in and i thought i saw welds.
Yes that exhaust is awesome.
Turbo NB Build Thread | BeavisMotorsport.com | YouTube.com/bbeavis | Cars: NA6, NA8-VVT, NB-Turbo, ND-2L
Who is online
Users browsing this forum: No registered users and 1 guest